Created At
Sep 06, 2021
Last Update
Sep 06, 2021
Platforms
HC 3 Lite, Z-box Hub, Yubii Home Pro, Yubii Home, Venture WISE, HC 3
Views
5575
Download
856
Type Quick App
QuickApp integration with Fronius inverters. Works with new energy panel.
Software version required: 5.080 or higher.
To configure this QuickApp, please provide the IP address of your inverter in the variables tab.
After successful connection, the quick app will add additional "endpoints" to the system:
- total production, shown as energy meter type (unit: kWh)
- current production, shown as power meter type (unit: W)
If the Fronius installation is equipped with the meter of consumed energy, another two additional endpoints will be available:
- total consumption, shown as energy meter type (unit: kWh)
- grid balance, shown as power meter type (unit: W). Value above 0 means that power is taken from the grid. Negative value means that power is exported to the grid.
12 Comments, Want to add comment please login
Qapp is not working fine with total consumption meter other than Fronius brand. Everything is displayed correctly in Fronius app. What is wrong ?
Good morning, I have the same problem after the fibaro upgrade, total consumption is correct in the energie panel but the production is not shown. I have fronius smarth meter.
Thank you for an excellent QA. Just a comment, Gen24 Inverters does not support E_DAY and E_TOTAL I have a battery and State Of Charge; self.SOC = fronius.Body.Data.Inverters['1'].SOC self:updateView("SOC", "text", "State of Charge: " .. string.format("%.3f",fronius.Body.Data.Inverters['1'].SOC) .. " %") SOC shows correct in panel, however I try to feed SOC values in a child process (same as Production, Grid etc) to add some logic to control hot water tank and pool heat pump. Ie, if SOC > and Grid -2500 and time etc... May I please ask for some assistance to add the SOC as a device/child? Thanks John
congratulations, nice app, some pictures would be helpful, thanks
Is this for the Fronius inverter or for the Fronius Smart Meter?