Toon Energy

This Quickapp retrieves energy consumption, energy production and gas usage from the Toon Energy meter version 1 or 2. 

 

This QuickApp has Child Devices for Consumption (Watt), Production (Watt), Consumption High (kWh), Consumption Low (kWh), Production High (kWh), Production Low (kWh), Production Actual (Watt), Gas Usage (l/h) and Total Gas (m³)

 

 

The Energy Usage from the Child devices Consumption High, Consumption Low, Production High and Production Low can be used for the HC3 Energy Panel

 

 

 

Your Toon Energy Meter needs to be rooted, see: https://github.com/JackV2020/Root-A-Toon-USB-Stick. This is the recommended all in one solution with a one time boot from USB stick, 10 minutes of work and done. 

 

After rooting you don't need a subscription anymore and you have access to a ToonStore with a growing number of apps. For more technical people there is a possibility to ssh into the Toon if they want with username root and password toon. Rooting is at your own risk, look here for further support and info: 

• See also: https://github.com/ToonSoftwareCollective/Root-A-Toon (if you already have a running Linux environment)
• See also: https://toonforum.nl/
• See also: https://www.domoticaforum.eu/

 

Version 2.0 (22th April 2023)

• Changed to multifile 
• Changed powerSensor to powerMeter and multiSensor to gasMeter
• Added translation for English and Dutch
• Added support for Toon version 2v6 (for example firmware version V5.49.19)
• Added support for Toon version 2v5
• Added support for Toon version 2v4
• Added support for Toon version 2v3
• Improved debug messages

Variables (mandatory): 

• IPaddress = IP address of your Toon Meter
• toonVersion = Version 1 or 2 (default)
• Interval = Number in seconds 
• debugLevel = Number (1=some, 2=few, 3=all, 4=simulation mode) (default = 1)

 

 

How to install: 

1. Open the Configuration Interface
2. Go to Settings > Devices
3. Click  +
4. Choose Other Device
5. Choose Upload File
6. Choose file from your computer with .fqa