Nilan Vantilation & Heat Pump Controller

This QuickApp integrates most of the Nilan machines manufactured since 2020 into the Fibaro system.

Features

• Ventilation (3): air conditioning, heat exchanger and vetillation settings scaled to three different user levels.
• DHW (2 and a half): domestic hot water production settings and monitoring scaled to three different user levels (the Guest level is shared with HPS's Guest level).
• HPS (2 and a half): geothermal and air-to-air heat pump unit settings and monitoring scaled to three different user levels (the Guest level is shared with DHW's Guest level).
• Sophisticated user interface divided into 9 QuickApps
• three different user access levels: Admin, User and Guest
• easy to access values from outside the QuickApp, you can read and write values from a scene

Requirements

1. A Nilan Heat pump with
   • CTS 602 board
   • a modbus RTU to TCP gateway. More info here
   • firmware version being at least 1.2.6.0
2. A Fibaro Home Center version 3 or Lite or greater.

Quick Start

1. Download the QuickApp file with fqax extension.
2. Install it as usual
3. Set up host and port variables for your Nilan machine or gateway.
4. If the QuickApp shows the MAC address and software version of your Heat Pump, then the hardware configuration was successful.
5. Get license key for your MAC address and copy it to the license_key variable.
6. After setting a valid license key you should see 8 more QuickApps created, and you can control all the settings of your QuickApp from Fibaro Homecenter dashboard or Yubi mobile App.

Detailed Documentation

Read more about this QuickApp here.