Nilan Gateway QuickApp

This Fibaro Home Center 3 QuickApp connects directly to a Nilan Gateway over the local network using UDP / Micro Nabto. It reads CTS602 values and can set the ventilation fan level.

Requirements

Fibaro Home Center 3 with QuickApp UDP support.
Nilan Gateway reachable on the same local network.
The email address authorized for the Nilan Gateway.
No local proxy, Docker service, or extra server is required.

Import

Import Nilan_Gateway.fqax in Fibaro HC3.
Open the QuickApp variables.
Fill in the required values.
Save the QuickApp.
Press Connect.

Variables

Variable	Example	Description
`gatewayIp`	`192.168.1.50`	Local IP address of the Nilan Gateway.
`gatewayPort`	`5570`	UDP port. Usually `5570`.
`deviceId`	`xxxxxxxxxxxx.remote.lscontrol.dk`	Device ID found by `Discover`.
`authorizedEmail`	`[email protected]`	Email authorized in the Nilan app/Gateway.
`modelProfile`	`cts602`	Keep `cts602` unless testing another profile.
`pollSeconds`	`30`	Automatic refresh interval in seconds.
`udpTimeout`	`3000`	UDP timeout in milliseconds.
`debug`	`false`	Set to `true` for extra log output.

Buttons

Sluk, 1, 2, 3, 4: set the ventilation fan level directly.
Discover: searches for the Nilan Gateway device ID on the LAN.
Connect: authenticates and starts the local UDP session.
Refresh: reads current values immediately.

Normal Use

Use Discover first if you do not know the deviceId. The Gateway IP may still need to be entered manually in gatewayIp.

After gatewayIp, deviceId, and authorizedEmail are set, press Connect. The QuickApp will then refresh automatically based on pollSeconds.

Fan control is available from the top row. Sluk sends fan level 0, and buttons 1 to 4 send the matching CTS602 fan level.

Notes

The clean public build does not include private gateway data. You must enter your own gatewayIp, deviceId, and authorizedEmail after import.

Please login to download

0 Comments, Want to add comment please login

Load more comments

Nilan Gateway QA