Created At

Oct 29, 2022

Last Update

Oct 31, 2022


HC 3 Lite, Z-box Hub, Yubii Home Pro, Yubii Home, Venture WISE, HC 3





Type Quick App

Integrate your analog water meter with the FIBARO Home Center 3 using the HomeWizard Wi-Fi Water meter.


  1. HomeWizard Wi-Fi Water meter,
  2. HomeWizard Energy iOS or Android app (minimal version 1.5.0),
  3. Water Meter Quick App,
  4. FIBARO Home Center 3.

Quick setup

View the included manual for detailed installation instructions. English installation instructions are included!

Wi-Fi P1 Meter installation

Perform the physical installation of the Wi-Fi P1 meter and and configure the device in the HomeWizard Energy app.

Activate the local API on the P1 meter

To establish communication between the FIBARO Home Center 3 and the HomeWizard Wi-Fi P1 meter, you need to activate the local API in the app.

  1. Start the HomeWizard Energy app on your phone,
  2. Go to Settings -> Meters,
  3. Open the settings from the configured meter by clicking on it,
  4. Enable the option for the local API.

Home Center 3 configuration

  1. Download the Quick App below,
  2. Extract the ZIP file,
  3. Log on to the Home Center 3,
  4. Import the Quick App.
  5. Set the IP address of the Wi-Fi Water meter.

Full documentation

Full documentation of the Wi-Fi Water meter Quick App is included in the provided ZIP file.

More interested FIBARO integrations and scenes can be found on my Smart Home Adventure blog.

16 Comments,  Want to add comment please login

Dankjewel Joep, great job!


Hi Joep, Thanks works also fine with the SDM230-wifi module. can see those parameters: - total_power_import_t1_kwh - total_power_export_t1_kwh BUT unfortunately i can see the actual power parameters: - active_power_w - active_power_l1_w could you help me with this? by reading the API: wifi_ssid "Tmobile" wifi_strength 100 total_power_import_t1_kwh 2284.974 total_power_export_t1_kwh 49.945 active_power_w 1278.008 active_power_l1_w 1278.008


hoi Joep Heb die homewizard water meter maar krijg geen waarde te zien in de ap van energie wel ook daystart kan je geen waarde invullen kan je me misschien verder helpen PS in de app van enegie kan je API maar op 1 meter activeren De P1 meter die ik van homewizard heb doet het wel


Koekje001;The water meter reads water, not energy. So I don't get your question.


Fijn Joep, dankjewel!

© 2024. Nice-Polska Sp. z o.o.Privacy policyTerms & ConditionsFeedback