Heatit WiFi Thermostat V 1.2

The QuickApp is compatible with the following products.

1. Heatit WiFi Thermostat Black Matt
2. Heatit WiFi Thermostat White RAL 9003
3. Heatit WiFi Thermostat White RAL 9010

For more info and download see: Heatit WiFi Thermostat V 1.2 - All in one

Main functionality

This QA is 100% compatible with temperature zones, Thermostat Mode Heat and Off. It has  power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child device is hidden. Nice if it is not in use in the summer. You can change the thermostat sensor mode in UI.

 

Main device:

• 1. Heatit WiFi Thermostat (Thermostat with Heat and Off mode, as well as power meter and energy meter)

Child device:

• 2. Internal Temperatur
• 3. Floor Temperatur (If floor sensor is connectd)
• 4. External Temperatur (If external sensor is connectd)

Quick App variables:

1. MAC Address. By default, this is set to Get. Do not change.
2. IP Address. Set this variable to the IP address of the Heatit WiFi Thermostat. QA will automatically look up the MAC Address and set it, and use this later
3. Temp Sensor. You can change this in UI. This is thermostat sensor mode. 
4. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Thermostat.

Thermostat sensor mode, you can change this in UI:

• 0. F: Floor Sensor. 
• 1. A: Internal room sensor. 
• 2. AF: Internal room sensor + Floor sensor. 
• 3. A2: External room sensor. 
• 4. A2F: External room sensor + Floor sensor.
• 5. PWER Not implementetd. Power regulator mode (no sensor used)

 

Change Log:

Main change in v 1.2 

For more info and download see: Heatit WiFi Thermostat V 1.2 - All in one

Now shows child device for floor, and external sensor if connected. It is now also possible to hide internal sensor, child device.

Main change in v 1.1

For more info and download see: Heatit WiFi Thermostat V 1.1 - All in one

Now shows child device for temperature floor sensor, and external temperature sensor if they are connected to the thermostat (see picture 1). The thermostat checks if the floor sensor and or external sensor are connected every time it goes from offline to online. This means that it is turned off physically via e.g. a fuse. It also only updates the temperature if it changes and it remembers the last measured temperature. Time of change is shown in the log field of the child device. This version also updates the sensor status in QA if it changes physically on the thermostat.

 

Road map:

• Add support for eco mode
• Add support for cooling mode
• Add support for child lock