Created At

Sep 06, 2021

Last Update

Dec 09, 2021


HC 3 Lite, Z-box Hub, Venture WISE, HC 3





Type Quick App

This QA connects to Daikin WiFi controllers BRP069Axx/BRP069Bxx (BRP069Cxx are not supported) that allow local connection and provides virtual thermostat device in Fibaro HC3 / HC3L interface and apps.

This QA uses the control API that are from Daikin Online Controller app.

If you use Daikin Residential Controller app to control your AC unit(s) then this QA won't work for you!

After uploading the QA you need to set the "ipaddress" variable to the IP address of your Daikin unit (enter just the IP address, no ports no http://). The IP address can be found in the official Daikin mobile app.

This QA is able to update other virtual sensor QAs with room temperature, outside temperature and room humidity.

In order to use these, create new QA and select the type as "Temperature sensor" or "Humidity sensor". Note the device ID for the newly created virtual sensors. Set the corresponding device IDs in this QA variables as follows:

- room_temp_id = The ID of the virtual temperature sensor that will show the room temperature read from Daikin AC

- room_hum_id = The ID of the virtual humidity sensor that will show the room humidity read from Daikin AC (NOTE: not all AC units support this)

- outside_temp_id = The ID of the virtual temperature sensor that will show the outside temperature read from Daikin AC (NOTE: It seems that outside temperature is available only when the AC unit is turned on)

Fan direction change (horizontal, vertical swing) is not implemented yet. Drop us a line if you need it.

Any feedback, suggestions and bug reports are welcome!

11 Comments,  Want to add comment please login

Hello. Like the others here, I find that I cannot control the heat pump with QuickApp, and must control it with the native Daikin App. But I can read out the status from it through QA. Is it rude to ask if this will be developed further?


Hi, I have BRP069B4X WIFI module daikin and same situation like pecericek. QA receive but not sent info. Any idea? thank you!


Hi, I have a xxxB41 WiFi module Daikin. QA communicates, more accurately receives http queries from this WIFI controller, but QA does not send them correctly. If I control the air conditioning via app Daikin online controller, the status change is updated in QA, but if I make the change via QA, the air conditioning will not perform any activity. Any idea? Thx.


Hi, I am looking at installing a ducted system which will have either BRCMTZCB or BRC24Z4B controllers. Would these be compatible with the QA?


I have the FTXTA30..., and using Residential Controller app. Get the temperature for the pump, and on/off status. But can`t controll anything with this QA. Tryed the other Daikin QA found in the forum, and there I can turn on/off the heat pump. So then I can controll it in scenes with other temp sensors in the room at least. But seems that I can`t controll the heat setting in the QA. Is there a way to combine these QAs, so you get the best of both? Want at least the temp showing in the QA :)