Daikin Online Controller AC unit plugin

Thanks for the excellent work.

Thanks for the excellent work. I wanted to apply the plugin to my Australian version of Daikin Airbase BRP15B61 and some settings were different and i wanted to share it with anyone facing with similar issues. - downloading the status: http://192.168.xx.xx/skyfi/aircon/get_control_info - setting the control: http://192.168.1.76/skyfi/aircon/set_control_info?pow=1&mode=1&stemp=22&dt1=21&dt2=21&dt3=21&f_rate=5&dfr0=1&dfr1=1&dfr2=5&dfr3=1&f_airside=0&airside0=0&airside1=0&airside2=0&airside3=0&f_auto=0&auto0=0&auto1=0&auto2=1&auto3=0&f_dir=0&dfd0=0&dfd1=0&dfd2=0&dfd3=0&dfd7=0&filter_sign_info=0&cent=0&en_cent=0&remo=2 the control set is different in my version: [DEBUG] 02:48:12: a[1]=ret=OK [DEBUG] 02:48:12: a[2]=pow=1 [DEBUG] 02:48:12: a[3]=mode=1 [DEBUG] 02:48:12: a[4]=stemp=23 [DEBUG] 02:48:12: a[5]=dt1=23 [DEBUG] 02:48:12: a[6]=dt2=21 [DEBUG] 02:48:12: a[7]=dt3=21 [DEBUG] 02:48:12: a[8]=f_rate=1 [DEBUG] 02:48:12: a[9]=dfr0=1 [DEBUG] 02:48:12: a[10]=dfr1=1 [DEBUG] 02:48:12: a[11]=dfr2=5 [DEBUG] 02:48:12: a[12]=dfr3=1 [DEBUG] 02:48:12: a[13]=f_airside=0 [DEBUG] 02:48:12: a[14]=airside0=0 [DEBUG] 02:48:12: a[15]=airside1=0 [DEBUG] 02:48:12: a[16]=airside2=0 [DEBUG] 02:48:12: a[17]=airside3=0 [DEBUG] 02:48:12: a[18]=f_auto=0 [DEBUG] 02:48:12: a[19]=auto0=0 [DEBUG] 02:48:12: a[20]=auto1=0 [DEBUG] 02:48:12: a[21]=auto2=1 [DEBUG] 02:48:12: a[22]=auto3=0 [DEBUG] 02:48:12: a[23]=f_dir=0 [DEBUG] 02:48:12: a[24]=dfd0=0 [DEBUG] 02:48:12: a[25]=dfd1=0 [DEBUG] 02:48:12: a[26]=dfd2=0 [DEBUG] 02:48:12: a[27]=dfd3=0 [DEBUG] 02:48:12: a[28]=dfd7=0 [DEBUG] 02:48:12: a[29]=filter_sign_info=0 [DEBUG] 02:48:12: a[30]=cent=0 [DEBUG] 02:48:12: a[31]=en_cent=0 [DEBUG] 02:48:12: a[32]=remo=2 the minimum parameter set is longer: param = a[2] .. "&" .. a[3] .. "&" .. a[4] .. "&" .. a[8] .. "&" .. a[13] .. "&" .. a[19] .. "&" .. a[23] and the mode parameters are different: if (mode == 3 or mode == 4 or mode == 5) then mode_name = "АUТО" elseif mode == 7 then mode_name = "Dry" elseif mode == 2 then mode_name = "Cooling" elseif mode == 1 then mode_name = "Heating" elseif mode == 0 then mode_name = "Fan" there are separate command for Auto/normal fan mode: a[18], f_auto=0 for normal and 1 for auto fan mode. I hope it is useful, thank you for all the great work,