Created At

Sep 12, 2020

Last Update

Sep 21, 2020

Platforms

HC 3 Lite, HC 3

Views

1367

Download

199

Type Quick App

Quickapp to control Daikin airconditioning with wifi adapter. Personally tested on the Daikin Comfora units.

Installation instructions:

After installation, the quick app creates couple of 'child devices', including 2 temperature devices. Note the ID's of those 2 temperature devices for use below:

Adjust the following 3 variables to get the app working:

IP: The IP address of your Daikin unit
Room temp ID: The device ID of the room temperature device
Outside temp ID: The device ID of the outside temperature device

Usage:

You can use the binary switch device to turn the airco on/off. It will use the last used settings. The 2 temperature devices will also automaticly updated if you set the above mentioned variables right.

The main deviceController has a 'remote control' when you expand it. Here you can set the different modes and temperature.

nb. The app refreshes all sensor info every 60 seconds. That means that if you turn the AC on or off using the 'remote control', it might take up to 60 seconds for that change to reflect the child devices (especially the binary switch).

13 Comments,  Want to add comment please login
F5a75d66c67b7cedcd6d8caa46c3c8b9

HI, I installed it and it worked for 1 airco, but I have 4 units, when I install this 4 times it doesn't work anymore. Anyone an idea to solve this?

72995e47b4b3e965cf6019e862ffdbe8

tried a bit furter. I have 2 different unit. A Style unit(which is on the old app) and 2x Daikin Perfera(which are on the new residential app) The quickapp works with the old Style unit, but not on the new perfera units. any way to figure that out?

72995e47b4b3e965cf6019e862ffdbe8

Just tried to install this quickapp, but sadly it doesnt seem to work. It looks like the whole /aircon/set_control_info is completely unavailable? End refresh sensor info [10.03.2021] [22:12:01] [TRACE] [QUICKAPP224]: Response status: 404 [10.03.2021] [22:12:01] [TRACE] [QUICKAPP224]: Response data: Page Not Found /aircon/get_control_info

E424f2e55a3a697ff96e9dee54ec0f35

It looks like this app doesn't work anymore. At least i can't get it to work. I have 2 Daikin devices (latest firmware) connected to Daikin residential app. But connecting with Fibaro leads to these error in the log: [02.03.2021] [12:26:00] [DEBUG] [QUICKAPP972]: Daikin controller 2:onInit [02.03.2021] [12:26:00] [DEBUG] [QUICKAPP972]: PowerSwitch init [02.03.2021] [12:26:00] [DEBUG] [QUICKAPP972]: Temperature init [02.03.2021] [12:26:00] [DEBUG] [QUICKAPP972]: Temperature init [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: Child devices: [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: [ 973 ] Power , type of: com.fibaro.binarySwitch [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: [ 974 ] Outside temperature , type of: com.fibaro.temperatureSensor [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: [ 975 ] Room temperature , type of: com.fibaro.temperatureSensor [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: Begin refresh control info [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: End refresh control info [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: Begin refresh sensor info [02.03.2021] [12:26:00] [DEBUG] [QUICKAPP972]: http://10.0.1.131/aircon/get_sensor_info [02.03.2021] [12:26:00] [TRACE] [QUICKAPP972]: End refresh sensor info [02.03.2021] [12:26:01] [TRACE] [QUICKAPP972]: Response status: 404 [02.03.2021] [12:26:01] [TRACE] [QUICKAPP972]: Response data: Page Not Found /aircon/get_control_info [02.03.2021] [12:26:01] [TRACE] [QUICKAPP972]: Begin received control info [02.03.2021] [12:27:00] [DEBUG] [QUICKAPP972]: Daikin controller 2:onInit [02.03.2021] [12:27:00] [DEBUG] [QUICKAPP972]: PowerSwitch init [02.03.2021] [12:27:00] [DEBUG] [QUICKAPP972]: Temperature init [02.03.2021] [12:27:00] [DEBUG] [QUICKAPP972]: Temperature init [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: Child devices: [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: [ 973 ] Power , type of: com.fibaro.binarySwitch [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: [ 974 ] Outside temperature , type of: com.fibaro.temperatureSensor [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: [ 975 ] Room temperature , type of: com.fibaro.temperatureSensor [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: Begin refresh control info [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: End refresh control info [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: Begin refresh sensor info [02.03.2021] [12:27:00] [DEBUG] [QUICKAPP972]: http://10.0.1.131/aircon/get_sensor_info [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: End refresh sensor info [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: Response status: 404 [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: Response data: Page Not Found /aircon/get_control_info [02.03.2021] [12:27:00] [TRACE] [QUICKAPP972]: Begin received control info

87d38b4915576952de0acd24d38717a4

When I have time, I'll see if I can update the app for scene temperature adjustment. 👍