Ajax system integration

Version 2.0.2 (2025.10.03)

The unique integration allows for exchange of information between Ajax and FIBARO/Nice systems, including synchronization of alarm zones and synchronization of statuses and alarms of all Ajax devices. 

This integration is published in form of encrypted QuickApp. File attached below is a trial (demo) version that runs for 3 days after installation, and is limited to 3 devices, and two alarm zones with blocked arming function.
The full version has no limitation and is distributed as an encrypted QuickApp, released for single FIBARO Home Center or Nice Yubii hub with serial number provided by the buyer.

Cost of the integration, per one FIBARO Home Center / NICE Yubii hub, is 180 Euro with VAT tax included.
Please contact us if you need USD, PLN or other quotation.

Contact and more details:
Wordwide: post @ intuitech.de
https://intuitech.de/bereiche/sicherheit-einbruchschutz/ajax-integration
Poland:  smarthome @ hdev.pl 
https://hdev.pl/en/fibaro_ajax.html 

10 Reasons to integrate Ajax with FIBARO/Nice

1. Full control in one app - manage your alarm system, home automation and scenes directly from your FIBARO hub or Yubii app - no need to switch between platforms.
2. Professional-grade alarm system in your smart home - Ajax delivers certified security, backup power and redundant communication. Now wireless and fully compatible with smart home automation.
3. Intelligent responses to open windows and doors - Window open? Automatically switch off air conditioning, change ventilation mode or pause heating.
4. Improved energy efficiency - adjust heating, blinds or lighting based on presence, time of day or outdoor conditions.
5. Smart reactions to alarms and threats - fire, gas, flood or panic detectors can trigger pre-set scenarios: raise blinds, turn on lights, shut water valves, activate cameras or alert neighbors.
6. Enhanced device insights - temperature readings and battery levels from Ajax devices are now accessible in the FIBARO/Nice system - ready for automation or analysis.
7. Safe disarming based on automation rules - disarm zones or Night mode automatically, based on resident habits, schedules or motion (e.g., light turned on in the bathroom at 6:00 AM).
8. Alarm control using FIBARO/Nice remotes and switches - gate remotes, geolocation or roller blind buttons can now trigger alarm actions — such as arming, panic alerts or entry countdowns.
9. Full control over Ajax switches from FIBARO/Nice - sockets, relays, switches - all integrated and accessible for use in scenes and schedules via Home Center.
10. Technical info at your fingertips - get battery alerts for rarely visited places like summer houses - especially when you are planning to be away for several months.

How it works

Integration works via the Ajax cloud. QuickApp does not communicate with the Ajax hub directly (e.g. via the local network), so HC/Yubii unit does not have to be in the same network or location as the alarm system. In particular - it is possible to connect to Ajax system installed in summer houses, apartments for rent, on boats, etc.

Compatibility

• FIBARO Home Center 3
• FIBARO Home Center 3 Lite
• Nice Yubii Home, Yubii Home PRO hubs
• Hubs compatibile to Yubii Nice: Z-box Hub, Venture WISE
• FIBARO/Nice firmware version: 5.150, or newer
• Any Ajax hub with user admin access rights

Integration scope

• Information about the system arming status - for each group/zone and for night mode. Possibility to define any rules and reactions at FIBARO/Yubii side to changes in these states.
• Possibility to arm or disarm any group/zone, and grouped arming and disarming (similarly as using the SpaceControl remote control)
• Information about an alarm occurrence for a given group/zone
• Detailed information about arming/disarming source  - name of user/device/scenario, with option to use it in scenes (new from version 2.0.2)
• Support for the Ajax operation with groups/zones and without groups (with one main zone and the Night zone)
• Information about the current status of alarm sensors (bistable and wired: including door/window sensors, sensors connected to Transmitter modules) with the possibility to define any reaction to a change in the status of each sensor
• Information about the violation of each alarm sensors, in particular sending critical alarms to mobile devices - non-armable sensors (smoke, flooding, assault, etc.) and armable sensors (motion sensors, doors/windows etc.)
• Control and reading of states from switches, sockets, relay modules etc., with support for energy consumption (for outlets, wallplugs etc.)
• Information about the battery status of each Ajax device and for the hub
• Information about Ajax hub connection status (online/offline)
• Thermometers in the FIBARO/Yubii system for all Ajax devices reporting temperature
• Possibility to trigger actions and scenes on the FIBARO/Yubii side in response to the use of certain buttons or inputs without triggering the alarm state.

The QuickApp supports English, German, Italian, Spanish, Dutch and Polish languages.

More information about available options and configuration of all devices can be found in the document available for download below.

Attached ZIP file for download

• Ajax Security QuickApp v2.0 DEMO  QuickApp file (fqax)
• QuickApp installation and configuration guide (PL, ENG)

The QuickApp is a demo version that works for 3 days after installation, and is limited to 3 devices, and two alarm zones with blocked arming function.
Fqax file shall be imported to your Home Center / Yubii Home hub at administration panel (accessed via Web browser): menu Settings, section Devices, button Add, tab Other Device, command Upload File.
NOTE: At the time of QuickApp installation, the FIBARO HomeCenter or Yubii Home hub must be registered on the owner's FibaroID account and must be connected to the Internet (this is a general requirement for the installation of encrypted QuickApps).